168 lines
8.1 KiB
Markdown
168 lines
8.1 KiB
Markdown
**Purpose**:
|
|
Deploying a Rancher RKE2 Cluster-based Ansible AWX Operator server. This can scale to a larger more enterprise environment if needed.
|
|
|
|
!!! note Prerequisites
|
|
This document assumes you are running **Ubuntu Server 22.04** or later with at least 16GB of memory, 8 CPU cores, and 64GB of storage.
|
|
|
|
## Deploy Rancher RKE2 Cluster
|
|
You will need to deploy a [Rancher RKE2 Cluster](https://docs.bunny-lab.io/Servers/Containerization/Kubernetes/Deployment/Rancher%20RKE2/) on an Ubuntu Server-based virtual machine. After this phase, you can focus on the Ansible AWX-specific deployment. A single ControlPlane node is all you need to set up AWX, additional infrastructure can be added after-the-fact.
|
|
|
|
!!! tip "Checkpoint/Snapshot Reminder"
|
|
If this is a virtual machine, after deploying the RKE2 cluster and validating it functions, now would be the best time to take a checkpoint / snapshot of the VM before moving forward, in case you need to perform rollbacks of the server(s) if you accidentally misconfigure something during deployment.
|
|
|
|
## Server Configuration
|
|
The AWX deployment will consist of 3 yaml files that configure the containers for AWX as well as the NGINX ingress networking-side of things. You will need all of them in the same folder for the deployment to be successful. For the purpose of this example, we will put all of them into a folder located at `/awx`.
|
|
|
|
``` sh
|
|
# Make the deployment folder
|
|
mkdir -p /awx
|
|
cd /awx
|
|
```
|
|
|
|
We need to increase filesystem access limits:
|
|
Temporarily Set the Limits Now:
|
|
``` sh
|
|
sudo sysctl fs.inotify.max_user_watches=524288
|
|
sudo sysctl fs.inotify.max_user_instances=512
|
|
```
|
|
|
|
Permanently Set the Limits for Later:
|
|
```jsx title="/etc/sysctl.conf"
|
|
# <End of File>
|
|
fs.inotify.max_user_watches = 524288
|
|
fs.inotify.max_user_instances = 512
|
|
```
|
|
|
|
Apply the Settings:
|
|
``` sh
|
|
sudo sysctl -p
|
|
```
|
|
|
|
### Create AWX Deployment Donfiguration Files
|
|
You will need to create these files all in the same directory using the content of the examples below. Be sure to replace values such as the `spec.host=awx.bunny-lab.io` in the `awx-ingress.yml` file to a hostname you can point a DNS server / record to.
|
|
|
|
=== "awx.yml"
|
|
|
|
```yaml title="/awx/awx.yml"
|
|
apiVersion: awx.ansible.com/v1beta1
|
|
kind: AWX
|
|
metadata:
|
|
name: awx
|
|
spec:
|
|
service_type: ClusterIP
|
|
```
|
|
|
|
=== "ingress.yml"
|
|
|
|
```yaml title="/awx/ingress.yml"
|
|
apiVersion: networking.k8s.io/v1
|
|
kind: Ingress
|
|
metadata:
|
|
name: ingress
|
|
spec:
|
|
rules:
|
|
- host: awx.bunny-lab.io
|
|
http:
|
|
paths:
|
|
- pathType: Prefix
|
|
path: "/"
|
|
backend:
|
|
service:
|
|
name: awx-service
|
|
port:
|
|
number: 80
|
|
```
|
|
|
|
=== "kustomization.yml"
|
|
|
|
```yaml title="/awx/kustomization.yml"
|
|
apiVersion: kustomize.config.k8s.io/v1beta1
|
|
kind: Kustomization
|
|
resources:
|
|
- github.com/ansible/awx-operator/config/default?ref=2.10.0
|
|
- awx.yml
|
|
- ingress.yml
|
|
images:
|
|
- name: quay.io/ansible/awx-operator
|
|
newTag: 2.10.0
|
|
namespace: awx
|
|
```
|
|
|
|
## Ensure the Kubernetes Cluster is Ready
|
|
Check that the status of the cluster is ready by running the following commands, it should appear similar to the [Rancher RKE2 Example](https://docs.bunny-lab.io/Containers/Kubernetes/Rancher%20RKE2/Rancher%20RKE2%20Cluster/#install-helm-rancher-certmanager-jetstack-rancher-and-longhorn):
|
|
```
|
|
export KUBECONFIG=/etc/rancher/rke2/rke2.yaml
|
|
kubectl get pods --all-namespaces
|
|
```
|
|
|
|
## Ensure the Timezone / Date is Accurate
|
|
You want to make sure that the Kubernetes environment and Node itself have accurate time for a number of reasons, least of which, is if you are using Ansible with Kubernetes authentication, if the date/time is inaccurate, things will not work correctly.
|
|
``` sh
|
|
sudo timedatectl set-timezone America/Denver
|
|
```
|
|
|
|
## Deploy AWX using Kustomize
|
|
Now it is time to tell Kubernetes to read the configuration files using Kustomize (*built-in to newer versions of Kubernetes*) to deploy AWX into the cluster.
|
|
!!! warning "Be Patient"
|
|
The AWX deployment process can take a while. Use the commands in the [Troubleshooting](https://docs.bunny-lab.io/Containers/Kubernetes/Rancher%20RKE2/AWX%20Operator/Ansible%20AWX%20Operator/#troubleshooting) section if you want to track the progress after running the commands below.
|
|
|
|
If you get an error that looks like the below, re-run the `kubectl apply -k .` command a second time after waiting about 10 seconds. The second time the error should be gone.
|
|
``` sh
|
|
error: resource mapping not found for name: "awx" namespace: "awx" from ".": no matches for kind "AWX" in version "awx.ansible.com/v1beta1"
|
|
ensure CRDs are installed first
|
|
```
|
|
|
|
To check on the progress of the deployment, you can run the following command: `kubectl get pods -n awx`
|
|
You will know that AWX is ready to be accessed in the next step if the output looks like below:
|
|
```
|
|
NAME READY STATUS RESTARTS AGE
|
|
awx-operator-controller-manager-7b9ccf9d4d-cnwhc 2/2 Running 2 (3m41s ago) 9m41s
|
|
awx-postgres-13-0 1/1 Running 0 6m12s
|
|
awx-task-7b5f8cf98c-rhrpd 4/4 Running 0 4m46s
|
|
awx-web-6dbd7df9f7-kn8k2 3/3 Running 0 93s
|
|
```
|
|
|
|
``` sh
|
|
cd /awx
|
|
kubectl apply -k .
|
|
```
|
|
|
|
!!! warning "Be Patient - Wait 20 Minutes"
|
|
The process may take a while to spin up AWX, postgresql, redis, and other workloads necessary for AWX to function. Depending on the speed of the server, it may take between 5 and 20 minutes for AWX to be ready to connect to. You can watch the progress via the CLI commands listed above, or directly on Rancher's WebUI at https://rancher.bunny-lab.io.
|
|
|
|
## Access the AWX WebUI behind Ingress Controller
|
|
After you have deployed AWX into the cluster, it will not be immediately accessible to the host's network (such as your personal computer) unless you set up a DNS record pointing to it. In the example above, you would have an `A` or `CNAME` DNS record pointing to the internal IP address of the Rancher RKE2 Cluster host.
|
|
|
|
The RKE2 Cluster will translate `awx.bunny-lab.io` to the AWX web-service container(s) automatically. SSL certificates are not covered in this documentation, but suffice to say, the can be configured on another reverse proxy such as Traefik or via Cert-Manager / JetStack. The process of setting this up goes outside the scope of this document.
|
|
|
|
!!! success "Accessing the AWX WebUI"
|
|
If you have gotten this far, you should now be able to access AWX via the WebUI and log in.
|
|
|
|
- AWX WebUI: https://awx.bunny-lab.io
|
|
|
|
You may see a prompt about "AWX is currently upgrading. This page will refresh when complete". Be patient, let it finish. When it's done, it will take you to a login page.
|
|
AWX will generate its own secure password the first time you set up AWX. Username is `admin`. You can run the following command to retrieve the password:
|
|
```
|
|
kubectl get secret awx-admin-password -n awx -o jsonpath="{.data.password}" | base64 --decode ; echo
|
|
```
|
|
|
|
## Change Admin Password
|
|
You will want to change the admin password straight-away. Use the following navigation structure to find where to change the password:
|
|
``` mermaid
|
|
graph LR
|
|
A[AWX Dashboard] --> B[Access]
|
|
B --> C[Users]
|
|
C --> D[admin]
|
|
D --> E[Edit]
|
|
```
|
|
|
|
## Troubleshooting
|
|
You may wish to want to track the deployment process to verify that it is actually doing something. There are a few Kubernetes commands that can assist with this listed below.
|
|
|
|
### AWX-Manager Deployment Logs
|
|
You may want to track the internal logs of the `awx-manager` container which is responsible for the majority of the automated deployment of AWX. You can do so by running the command below.
|
|
```
|
|
kubectl logs -n awx awx-operator-controller-manager-6c58d59d97-qj2n2 -c awx-manager
|
|
```
|
|
!!! note
|
|
The `-6c58d59d97-qj2n2` noted at the end of the Kubernetes "Pod" mentioned in the command above is randomized. You will need to change it based on the name shown when running the `kubectl get pods -n awx` command. |