Update Virtualization/Proxmox/ProxmoxVE.md

Virtualization/Proxmox/ProxmoxVE.md

@@ -86,27 +86,64 @@ iface eno2 inet manual
 
 - Adjust the network interfaces to add a bond:
 ```jsx title="/etc/network/interfaces"
+auto eno1
 iface eno1 inet manual
+
+auto eno2
 iface eno2 inet manual
 
+auto bond0
 iface bond0 inet manual
-        bond-slaves eno1 eno2 # Interfaces to assign to the bond
-        bond-miimon 100 # Enable Bond Monitoring - Suggested to Configure based on Proxmox Guidance
+        bond-slaves eno1 eno2
+        bond-miimon 100
         bond-mode 802.3ad
         bond-xmit-hash-policy layer2+3
 
 auto vmbr0
 iface vmbr0 inet static
-        address 192.168.3.4/24
-        gateway 192.168.3.1
+        address 192.168.0.11/24
+        gateway 192.168.0.1
         bridge-ports bond0
         bridge-stp off
         bridge-fd 0
-        bridge-vlan-aware yes
-        bridge-vids 2-4094
+#        bridge-vlan-aware yes # I do not use VLANs
+#        bridge-vids 2-4094 # I do not use VLANs (This could be set to any VLANs you want it a member of)
 ```
 
 !!! warning
     Be sure to include both interfaces for the (Dual-Port) 10GbE connections in the network configuration.  Final example document will be updated at a later point in time once the production server is operational.
 
 - Reboot the server again to make the networking changes take effect fully.  Use iLO / iDRAC / IPMI if you have that functionality on your server in case your configuration goes errant and needs manual intervention / troubleshooting to re-gain SSH control of the proxmox server.
+
+## Generalizing VMs for Cloning / Templating:
+These are the commands I run after cloning a Linux machine so that it resets all information for the machine it was cloned from.
+
+!!! note
+    If you use cloud-init-aware OS images as described under Cloud-Init Support on https://pve.proxmox.com/pve-docs/chapter-qm.html, these steps won’t be necessary!
+
+```jsx title="Change Hostname"
+sudo nano /etc/hostname
+```
+
+```jsx title="Change Hosts File"
+sudo nano /etc/hosts
+```
+
+```jsx title="Reset the Machine ID"
+rm -f /etc/machine-id /var/lib/dbus/machine-id
+dbus-uuidgen --ensure=/etc/machine-id
+dbus-uuidgen --ensure
+```
+
+```jsx title="Regenerate SSH Keys"
+rm -f /etc/machine-id /var/lib/dbus/machine-id
+dbus-uuidgen --ensure=/etc/machine-id
+dbus-uuidgen --ensure
+```
+
+```jsx title="Reboot the Server to Apply Changes"
+reboot
+```
+
+## Configure Alerting
+https://technotim.live/posts/proxmox-alerts/